Get Support

09 8818 111 22

image
Language

img

Download Apps

Pressure Pump

ImgImg

Pressure Pump

Service Types
Pressure Pump Installation

Pressure Pump Check-up & Repair

Service Include/Exclude

  • Mounting the pump unit on flat surface
  • Inlet & outlet pipe connection
  • Electrical wiring to nearby power source 
  • Joint sealing with Teflon tape or rubber
  • Pressure setting adjustment (manual type)
  • Priming and testing
  • Basic function demo to customer
  • Minor wall drilling (for wire or pipe access)

  • New electrical switchboard, MCB, or socket
  • Pipe extension  (inlet/outlet)
  • Concrete base construction
  • Installation in tight, high, or underground areas
  • Automatic controller/panel setup
  • Valve, filter, or pressure tank installation
  • Piping into concrete wall, tile, or steel
  • Protective cover or shed installation

  • Basic fault inspection and pressure test
  • Electrical terminal reconnection
  • Pressure switch adjustment
  • Impeller cleaning (surface only)
  • Water leak check and joint tightening
  • Minor vibration or noise fix
  • Capacitor reseating or contact cleaning
  • Suction pipe airlock clearance
  • Pressure gauge or check valve inspection

  • Motor rewinding or replacement
  • Impeller or mechanical seal replacement
  • Capacitor replacement
  • Pressure switch replacement
  • Electronic controller/auto sensor board repair
  • Pipe replacement or reinstallation
  • Shaft, bearing, or rotor replacement
  • Underground or rooftop pump servicing

Why choose No.1 Service

Verified Technicians

Background‑checked pros with on‑platform ratings.

Flexible Scheduling

Book slots that match your availability.

Transparent Pricing

Clear quotes with no hidden fees.

Quality Guarantee

Workmanship warranty on serviced units.

How it works

Place the Pump (Pressure Pump)

Place the Pump (Pressure Pump)

We check the best location and install it on a strong, level surface.

Technician Checks the Problem (Pressure Pump)

Technician Checks the Problem (Pressure Pump)

We inspect the pump, power, wiring, and water flow. Find out what’s wrong — like low pressure, no power, or strange noise.

Connect Pipes & Wires (Pressure Pump)

Connect Pipes & Wires (Pressure Pump)

Water pipes and electric cables are safely connected. We install valves and fittings as needed.

We Fix It (Pressure Pump)

We Fix It (Pressure Pump)

Technician cleans, adjusts, or resets parts. No spare parts included — just labor to fix small issues.

Test & Adjust (Pressure Pump)

Test & Adjust (Pressure Pump)

We turn on the pump, check the pressure, fix any leaks, and adjust the settings.

Test & Confirm (Pressure Pump Repair)

Test & Confirm (Pressure Pump Repair)

Turn on the pump and check pressure. Make sure it runs smoothly. Technician explains the result and gives tips.

FAQ

Your pressure pump may not turn on due to no power supply, a tripped breaker, a faulty capacitor, a damaged pressure switch, or motor issues. A technician inspection is recommended.

This is usually caused by water leakage in the pipeline, low air pressure in the tank, a faulty pressure switch, or a damaged check valve.

This may happen due to air lock in the system, clogged pipes, a blocked filter, a damaged impeller, or insufficient water supply.

Unusual noise can be caused by air trapped in the pump, worn bearings, loose fittings, cavitation, or internal mechanical damage.

This usually happens when the pressure switch is faulty, there is a water leak in the system, or the pressure tank is not holding pressure properly.

Low pressure may be due to clogged pipes, dirty filters, worn pump components, incorrect pump size, or pressure switch misadjustment.

It may be caused by motor overload, short circuit, capacitor failure, low voltage supply, or electrical wiring problems.

Overheating can occur due to continuous operation, blocked water flow, low voltage, mechanical friction, or poor ventilation around the motor.

Leakage is commonly caused by a damaged mechanical seal, loose pipe joints, worn gaskets, or cracks in the pump housing.

It is recommended to service your pressure pump every 6 to 12 months depending on usage and water quality.

Yes. Most major brands can be repaired depending on spare parts availability and the condition of the pump.

Replacement is recommended when the motor is severely damaged, repair costs are too high, or the pump performance is no longer stable after repeated repairs.
Get Started & Support
  • 24/7 Availability: Our support staff is always online to help you.
  • Flexible scheduling: Book an appointment that fits your timeline.
  • Instant Booking: Make your booking instantly with our support team.
  • Expert Support: Have a specific question? Speak directly with our specialists.
Book via Mobile App

Download our app for a faster booking experience, real-time service updates, and exclusive rewards available only to mobile users.

Download Our App